by sabcolautti | Sep 10, 2014 | Prototype |
We tested the pump of watercooling in the water and then we wanted to know if she could be functionning in the oil. We tested it in a can of oil and it is a success !!!!...
by sabcolautti | Sep 9, 2014 | Prototype |
Here is the list of raw materials, tools and other materials you need to build a ruggedpod. Raw materials : - square aluminium tubes (x12) - angles connectors PVC (x8) - mastic glue every weather (x1) - fine aluminium sheet 0.5 mm thickness (=5 square mm faces...
by vejmarie | Sep 5, 2014 | Prototype |
Our first tank is now up and running in the lab. We will post later on a few feedbacks on the design constraint and capabilities. The key thing is that we met more than expected sealing issues. We faced leakages and even with rivets assembled every 2 cm and using a...
by jjchanut | Aug 29, 2014 | Prototype, mechanical |
Hello all, We started the construction of a first real-life system to test in real conditions the results of the thermal simulations. The first step is to make a waterproof aluminum casing. Then we will need a frame to be able to install one or more motherboards. Here...